Influence of the anisotropic material behavior of AlSi10Mg produced by SLM process under multiaxial loading

Anisotropy in parts manufactured using the SLM process depends on process parameters such as laser power, exposure speed and exposure strategy. The aim of the research project is to investigate the pronounced anisotropic material properties with regard to the yield strength, tensile strength and elongation at break for additively manufactured ...

Duration: 02/2024 - 01/2027

Funded by: DFG

NeMo.bil – System of cooperating vehicles for individualised public transport

Programme line: New vehicle and system technologiesIn the joint project "NeMo.bil", an innovative, swarm-like mobility system is being developed and prototyped. This enables a new form of sustainable and demand-oriented passenger and goods transport in rural areas. To this end, a new systemic approach is being pursued that combines swarms of ...

Duration: 07/2023 - 06/2026

Funded by: BMWK

Contact: Dr.-Ing. Thorsten Marten, Dr. Christoph Weskamp

Analyse und Bewertung der Auswirkungen von Eigenspannungen auf den Sch?digungsverlauf in intrinsisch gefertigten Kunststoff-Metall-Schichtverbunden unter statischer und zyklischer Last

In dem Projekt ?Eigenspannung II“ sollen die Wirkungen der fertigungsbedingten Eigenspannungen auf das Bauteilverhalten unter mechanischer Beanspruchung untersucht werden. Der Schwerpunkt soll dabei auf der Analyse des Sch?digungsverlaufs unter statischer und schwingender Beanspruchung liegen. Dabei sollen grundlegende Zusammenh?nge zwischen ...

Duration: 01/2023 - 06/2025

Funded by: DFG

Contact: Hayrettin Irmak

MADE3D – Multi-Material Design in 3D Printing

Additive manufacturing (AM) has the economic potential to complement conventional manufacturing processes, especially in the production of complex, multi-material (MM) components. To exploit the full benefits of optimized lightweight structures, it is usually required to use multi-materials with different physical properties. Still, multi-material ...

Duration: 01/2023 - 06/2026

Funded by: EU

Development of functionally integrated PANELS as panel-shaped sandwich lightweight solutions for furniture and interior design applications for mobile and real estate

The increasing focus on resource conservation and sustainability requires a motivated, proactive approach in all areas of industrial production. The furniture industry has a special responsibility because of its large access to the most important renewable raw material, wood. Saving wood saves CO2 and sequesters it by reducing deforestation as the ...

Duration: 06/2022 - 05/2025

Funded by: BMWK